Field Engineer (CCTV, Cabling & Traffic Counter Installation)We require a skilled Field Engineer to perform CCTV installation, structured cabling, and traffic counter deployment at client sites. The engineer must be capable of handling end-to-end installation, configuration, and verification of systems.Scope of Work:Install and configure CCTV cameras at designated points.Run structured CAT5e/6 cabling across customer premises.Terminate, test, and label cables for connectivity assurance.Install and configure traffic counters as per site requirements.Ensure proper drilling, mounting, and alignment of devices.Verify device connectivity and integration with network systems.Document the work performed and provide before/after photos.Report status to the service desk and obtain site contact sign-off.Tools & Equipment Required:Fully charged laptop with RetailNext Network Utility installed.15.4W Standard PoE Injector (48V/0.3A DC).CAT5e cable (50 ft), 5 x RJ45 heads, 1 x RJ45 Gender Changer.Cable tester, cable toner / tracer / tone tester.Cat5e/6 crimping tools.Screwdriver set (Phillips & flat), Allen keys / torque bits.Drywall screws and anchors.Drill with assorted drill bits (½", ⅛", 1").Spirit level / leveler tool.10–12 ft A-type ladder.Mobile phone with internet, hotspot capability, and camera.Requirements for Engineer:Experience in CCTV installation, structured cabling, and network device setup.Familiarity with traffic counter devices and integration.Ability to use cable testing and crimping tools.Proficient in laptop-based testing and configuration.Must have good communication skills and ability to coordinate with client contacts.English language proficiency (additional local language skills preferred).Physically fit to handle ladder work and equipment installation.Responsibilities:Arrive on site on time and announce as NSC Engineer (do not disclose employer company name).Verify scope of work with the onsite contact before starting.Carry out installation, cabling, and device setup per technical requirements.Test all installed devices and confirm functionality with the service desk.Label all cables and devices as required.Complete a Site Visit Report (SVR) and have it signed by the client onsite contact.Submit documentation, photos, and SVR to service desk within 48 hours of completion.
#J-18808-Ljbffr